The Acesonic HM-100 is one of the most tough and rugged vocal microphones
Acesonic has developed. Everything from the bottom up has been strengthened for
use in high traffic events where this microphone may switch hands many times in
one night. Heavy use will wear down most microphones in all areas quickly but
you'll get a lot more use out of this microphone. First off, the 1/4" connector
has been designed to be more durable and to reduce stress at this joint from
pulling or bending. Leading the way up the main mic is 16ft commercial grade
microphone cable that is not only durable, but resistant to tearing and
shearing. The microphone head is also dent resistant.
One of the most common break points is where an XLR connection usually exists
between the microphone and the cable. Acesonic has decided to use a solid
connection that is supported by a heavy duty rubber boot and held together with
the coupler you see at the bottom. This helps to prevent breaks when the
microphone is pulled. This design is superior because the traditional XLR joints
develop freeplay over time and will loose connection. Avoid this at your next
event by using the Acesonic HM-100!
Features:
- Heavy duty design and materials than handle heavy usage
- Dent resistant microphone head
- Strong, solid, and super flexible 1/4" connector - No need to connect or
disconnect, minimizes connector breakage or damage
- 16ft ultra-durable, commercial grade microphone cable
Specifications:
- Microphone Type: Moving Dynamic Coil
- Polar Pattern: Uni-Directional
- Frequency Response: 50Hz - 15KHz
- Impedance: 600 ohms +/- 30% @ 1KHz
- Sensitivity (0dB=1v/pa@1KHz): -49.4 +/-3dB
Would you like to help others by submitting a review? Create an account and earn points for your reviews!