Acesonic UHF-A6 Commercial UHF Wireless Microphone

The Acesonic UHF-A6 Wireless Microphone System is a professional and commercial grade UHF True Diversity system. It supports up to 100 individual channels to be used simultaneously (multiple receivers required). This is perfect for any situation where multiple microphones are required where you have to switch channels to avoid interference. This system provides the quality and durability required in venues such as a KTV room, karaoke bar, restaurant, or auditorium. Provisions for rack mounting are built-in for convenience.

The microphone picks up your voice within its wide range perfectly with a solid design housed inside a rugged metal case and metal wire head. To switch channels, you simply unscrew the lower half of each handheld microphone to reveal the battery compartment and IR (Infra-Red) sync panel. Simply change your settings and the microphone and receiver will automatically sync via IR.

The Acesonic UHF-A6 also has many optional items to expand on this system such as:

• White Handheld Microphone
• Silver Handheld Micorphone
• Black Handheld Microphone (2 included)
• Body Pack with Lapel and Headset
• Charging Station that can house up to 20 handheld microphones

Features:

• UHF True Diversity - 2 radio modules per antenna are continuously compared to select the strongest signal delivering an exceptionally stable radio signal.
• Ability to use up to 100 individual channels simultaneously (multiple receivers req'd)
• Built-in SQ - Allows you to adjust the receivers range. If more than one radio system is used in a single area, adjust your SQ to only go as far as your microphones to avoid picking up unwanted frequencies.
• High Durability - Dent resistant to avoid damage from big drops.
• Channel Assigned Frequencies - It's easier to remember a single number than a frequency number so we created a way to assign an "easier to remember" to each frequency such as 1, 2, 3, etc... versus xxx.xx. This makes assigning different microphones to different rooms a snap.

Receiver Specifications:

• Frequency Stability: +/- 0.005%
• Image Interference Rate: >80dB
• S/N Ratio: >105dB
• Sensitivity: -107dBM
• T.H.D.: <0.5%
• Audio Output Impedance: 600 Ohms
• Audio Output Level: -12dB
• Display: LCD
• Frequency Range: 645.250-674.95MHz
• Frequency Preparation: PLL
• Receiver Channels: 100 Individual Channels
• Frequency Response: 15Hz-20KHz
• Maximum Distance: 150M

Microphone Specifications:

• Dynamic Range: >110dB
• Frequency Stability: +/- 0.005%
• Frequency Deviation: +/- 45KHz
• Spuitous Rejection: <48dBc
• RF Output: 10mW
• Quantity of Power Consumption: 90mA
• Battery: AA 1.2V/1.5V x 2
• Display: LCD

	Acesonic UHF-A6 (PDF, 1.43MB) (Right click, save as...)
	Click here to download the instruction manual