Audio-Technica ATW-1302 System 10 PRO Wireless Microphone

ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1002 handheld dynamic unidirectional microphone/transmitter.

Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays.

The ATW-T1006 Boundary Microphone/Transmitter and the ATW-T1007 Microphone Desk Stand Transmitter can be paired with any System 10 or System 10 PRO digital wireless receiver and are available separately. 

Features:

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  
• Operates in the 2.4 GHz range – completely free from TV interference
  
• Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
  
• Up to five chassis (ten receiver units) can be linked and used simultaneously
  
• Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  
• Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  
• Automatic frequency selection for seamless, interference-free operation
  
• Extremely easy operation with instantaneous channel selection, sync, and setup
  
• Three levels of diversity assurance: frequency, time & space
  
• Ground-lift switch helps eliminate audible hum caused by ground loops
  
• The ATW-T1006 Boundary Microphone/Transmitter and the ATW-T1007 Microphone Desk Stand Transmitter can be paired with any System 10 or System 10 PRO digital wireless receiver and are available separately

Specifications:

OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies	2.4 GHz ISM band
Dynamic Range	>109 dB (A-weighted), typical
Total Harmonic Distortion	<0.05% typical
Operating Range	60 m (200') Open range env. with no interfering signals
Operating Temperature Range	0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Frequency Response	20 Hz to 20 kHz  Depending on microphone type

RECEIVER SPECIFICATIONS
Receiving System	Diversity (frequency/time/space)
Output Connectors	Remote Receiver Connector: RJ45  Link Connector: RJ12
Maximum Output Level	XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply	100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions	209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Net Weight	940 grams (33.2 oz)
Accessory Included	Power supply
Accessories Included	AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output	10 mW
Spurious Emissions	Following federal and national regulations
Input Connections	Four-pin Locking Connector  Pin 1: GND, Pin 2: INST INPUT,  Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries	Two 1.5V AA  not included
Battery Life	>7 hours (alkaline)  Depending on battery type and use pattern
Dimensions	70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight	100 grams (3.5 oz)  without batteries

HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output	10 mW
Spurious Emissions	Following federal and national regulations
Batteries	Two 1.5V AA  not included
Battery Life	>7 hours (alkaline)  Depending on battery type and use pattern
Dimensions	254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight	280 grams (9.9 oz)  without batteries
Accessory Included	AT8456a Quiet-Flex™ stand clamp

Download Instruction Manual